
Screw-cutting lathe, model 16К20, distance between centres-1500
Enlarge photoPhotographs of the company's equipment. Confirm current condition and included items before arranging an inspection.
Repair and major overhaul 16К20 РМЦ-1500
Discuss repairs or a major overhaul of your machine. Feasibility, site visits, costs and timing are confirmed after reviewing the task and assessing its condition.
How our repair process worksAttach photos, drawings and specifications to your email or message.
Description
The screw-cutting lathe, model 16К20, is designed for external and internal turning and cutting right- and left-hand, single- and multiple-start threads with normal and increased pitches in one-off and small-batch production. The headstock and feed gearbox are mounted on the left of the bed; the carriage with apron, cross slide and tool post runs on the bed guideways; the tailstock is on the right. The headstock contains the spindle speed gearbox, with controls on its front panel. Longitudinal carriage and cross-slide feeds are provided by mechanisms in the apron, driven by the feed shaft during turning or the leadscrew during thread cutting. A tray below the bed collects chips and coolant.
Technical specifications
- Maximum workpiece length, mm
- 1400
- Centre height above the flat bed guideways, mm
- 215
- Speed range, rpm
- 12,5-1600
- Feed range, mm/rev:
- Longitudinal
- 0,05-2,8
- Transverse
- 0,002-0,11
- Main drive motor power, kW
- 11
- Maximum workpiece diameter over the bed, mm
- 400
- Maximum machining diameter over the carriage cross slide, mm
- 220
- Maximum bar diameter passing through the spindle bore, mm
- 50
- Machine overall dimensions, mm:
- Length
- 3195
- Width
- 1190
- Height
- 1500
- Machine weight, kg
- 3225
Inspection and delivery
Please call before visiting to confirm the inspection location and site access.
Tell us the model, destination city and country, required configuration and timing. We will check feasibility and agree inspection, preparation, transport and documentation for your enquiry.
DeliveryOur projects


Major overhaul and modernisation: 16К20, distance between centres 1000
Overhaul and digital readout installation
- Work carried out
- We built a new electrical cabinet and replaced the wiring. Optical scales and a digital readout were installed.
The machine was run in under all operating modes and handed over after technical accuracy checks. It was accepted by the customer.
View detailsRelated equipment
Availability to be confirmed
165 РМЦ-2800 ДИП-500
Screw-cutting lathes
- Maximum workpiece diameter, mm:
- Over the bed
- 1300
- Over the carriage
- 940
Availability to be confirmed
165 РМЦ-5000 ДИП-500
Screw-cutting lathes
- Maximum workpiece diameter, mm:
- Over the bed
- 1000
- Over the carriage
- 640
Availability to be confirmed
16Д20
Screw-cutting lathes
- Workpiece diameter over the bed, mm
- 400
- Workpiece diameter over the slide, mm
- 220
- Spindle bore diameter, mm
- 63
Availability to be confirmed
16Д25
Screw-cutting lathes
- Workpiece diameter over the bed, mm
- 500
- Workpiece diameter over the slide, mm
- 290
- Workpiece length, mm
- 1000