Major overhaul and modernisation: 16К20, distance between centres — 1400
Our company performed Full major overhaul and modernisation Of this machine model. Modernisation included manufacturing a completely new electrical cabinet, replacing wiring and replacing cable routes.
- Running-in and operational checks completed in all modes;
- The machine was handed over to the customer following quantity, quality, operational and technical accuracy checks.
The photographs show this particular machine.
A universal screw-cutting lathe of normal accuracy. Designed for various turning operations using three- or four-jaw chucks, centres or collet chucks on metal, plastic and other workpieces. It performs rough and finish turning of external cylindrical and conical surfaces, hole enlargement and boring, facing and thread cutting, including metric, imperial, module and diametral pitch threads, in one-off and small-batch production.
Design features including modernisation:
- The wide spindle speed and feed gearbox range ensures productive machining, while the rigid cast bed ensures a good surface finish.
- The universal feed gearbox enables metric, imperial, module and diametral pitch threads to be cut.
- The slide has scales with pointers for convenient measurement of top and cross slide travel during operation. The tool holder design improves clamping stability.
- Special precision spindle bearings require no adjustment during operation, ensuring the required rigidity and high workpiece machining accuracy.
- The module "2" gears in the kinematic chain and the overall machine design ensure high reliability.
- The spindle can be engaged, disengaged, reversed and braked during operation without stopping the electric motor, by means of a friction clutch.
- The apron features an original slide feed disengagement mechanism (drop worm), providing highly accurate stopping against a fixed stop.
- Improved electrical system reliability through electrical control equipment based on modern components and installation of new wiring and cable runs.
- Improved ease of use and productivity through a 2-axis digital readout.
| Machine technical specifications: | 16К20, distance between centres — 1400 |
|---|---|
| Accuracy class under GOST 8-82 | Н |
| Maximum workpiece diameter over the bed, mm | 400 |
| Centre height above the flat bed guideways, mm | 215 |
| Maximum workpiece diameter machined over the slide, mm | 220 |
| Maximum workpiece length between centres, mm | 1400 |
| Maximum distance from centreline to tool post edge, mm | 225 |
| Maximum drill diameter when drilling steel parts, mm | 25 |
| Maximum workpiece weight for machining between centres, kg | 460..1300 |
| Maximum weight of workpiece machined in the chuck, kg | 200 |
| Spindle | |
| Spindle bore diameter, mm | 52 |
| Maximum bar diameter passing through the spindle bore, mm | 50 |
| Forward spindle speed, rpm | 12,5..1600 |
| Reverse spindle speed, rpm | 19..1900 |
| Number of forward spindle speeds | 22 |
| Number of reverse spindle speeds | 11 |
| Spindle nose according to GOST 12593-72 | 6K |
| Spindle tapered bore according to GOST 2847-67 | Morse 6 |
| Spindle flange diameter, mm | 170 |
| Feeds | |
| Maximum longitudinal travel, mm | 645, 935, 1335, 1935 |
| Maximum cross travel, mm | 300 |
| Rapid longitudinal traverse speed, mm/min | 3800 |
| Rapid cross traverse speed, mm/min | 1900 |
| Maximum permissible travel speed when operating against stops, mm/min | 250 |
| Minimum permissible carriage (slide) travel speed, mm/min | 10 |
| Longitudinal travel dial division, mm | 1 |
| Cross-travel graduated dial division, mm | 0,05 |
| Longitudinal feed range, mm/rev | 0,05..2.8 |
| Cross-feed range, mm/rev | 0,025..1,4 |
| Number of longitudinal feeds | 42 |
| Number of transverse feeds | 42 |
| Metric thread pitch range, mm | 0,5..112 |
| Inch thread pitch range, threads/inch | 56..0,5 |
| Module thread pitch range, module | 0,5..112 |
| Diametral pitch thread range, diametral pitch | 56..0,5 |
| Maximum tool force permitted by the feed mechanism - longitudinal, N | 5884 |
| Maximum tool force permitted by the feed mechanism - transverse, N | 3530 |
| Tool slide | |
| Maximum compound slide travel, mm | 150 |
| Compound slide travel per graduated dial division, mm | 0,05 |
| Maximum tool slide swivel angle, deg | ±90° |
| Tool slide swivel scale graduation, deg | 1° |
| Maximum cutting tool shank cross-section, mm | 25 × 25 |
| Height from the tool support surface to the centreline (tool height), mm | 25 |
| Number of tools in the tool head | 4 |
| Tailstock | |
| Tailstock quill diameter, mm | |
| Tailstock quill bore taper under GOST 2847-67 | Morse 5 |
| Maximum quill travel, mm | 150 |
| Quill movement per dial division, mm | 0,1 |
| Lateral offset of the head body, mm | ±15 |
| Main drive motor, kW | 11 |
| Rapid traverse drive motor, kW | 0,12 |
| Coolant pump motor, kW | 0,125 |
| Machine dimensions and weight | |
| Length, mm | 3195 |
| Width, mm | 1190 |
| Height, mm | 1500 |
| Distance between centres, mm | 1400 |
| Machine weight, kg | 3210 |








