SpecmehanizmMachine tools, repairs and CNC upgrades +7 (911) 941-00-11Call a specialist
Russia & CIS · international enquiries

Screw-cutting lathe, model 16К20, distance between centres — 1400 mm.

Availability to be confirmed

Repair and major overhaul 16К20, distance between centres — 1400

Discuss repairs or a major overhaul of your machine. Feasibility, site visits, costs and timing are confirmed after reviewing the task and assessing its condition.

How our repair process works
Call about repairs

Attach photos, drawings and specifications to your email or message.

Description

A universal screw-cutting lathe of normal accuracy. Designed for various turning operations using three- or four-jaw chucks, centres or collet chucks on metal, plastic and other workpieces. It performs rough and finish turning of external cylindrical and conical surfaces, hole enlargement and boring, facing and thread cutting, including metric, imperial, module and diametral pitch threads, in one-off and small-batch production.

Design features including modernisation:

  • The wide spindle speed and feed gearbox range ensures productive machining, while the rigid cast bed ensures a good surface finish.
  • The universal feed gearbox enables metric, imperial, module and diametral pitch threads to be cut.
  • The slide has scales with pointers for convenient measurement of top and cross slide travel during operation. The tool holder design improves clamping stability.
  • Special precision spindle bearings require no adjustment during operation, ensuring the required rigidity and high workpiece machining accuracy.
  • The module "2" gears in the kinematic chain and the overall machine design ensure high reliability.
  • The spindle can be engaged, disengaged, reversed and braked during operation without stopping the electric motor, by means of a friction clutch.
  • The apron features an original slide feed disengagement mechanism (drop worm), providing highly accurate stopping against a fixed stop.
  • Improved electrical system reliability through electrical control equipment based on modern components and installation of new wiring and cable runs.
  • Improved ease of use and productivity through a 2-axis digital readout.

Technical specifications

Accuracy class under GOST 8-82
Н
Maximum workpiece diameter over the bed, mm
400
Centre height above the flat bed guideways, mm
215
Maximum workpiece diameter machined over the slide, mm
220
Maximum workpiece length between centres, mm
1400
Maximum distance from centreline to tool post edge, mm
225
Maximum drill diameter when drilling steel parts, mm
25
Maximum workpiece weight for machining between centres, kg
460..1300
Maximum weight of workpiece machined in the chuck, kg
200
Spindle
Spindle bore diameter, mm
52
Maximum bar diameter passing through the spindle bore, mm
50
Forward spindle speed, rpm
12,5..1600
Reverse spindle speed, rpm
19..1900
Number of forward spindle speeds
22
Number of reverse spindle speeds
11
Spindle nose according to GOST 12593-72
6K
Spindle tapered bore according to GOST 2847-67
Morse 6
Spindle flange diameter, mm
170
Feeds
Maximum longitudinal travel, mm
645, 935, 1335, 1935
Maximum cross travel, mm
300
Rapid longitudinal traverse speed, mm/min
3800
Rapid cross traverse speed, mm/min
1900
Maximum permissible travel speed when operating against stops, mm/min
250
Minimum permissible carriage (slide) travel speed, mm/min
10
Longitudinal travel dial division, mm
1
Cross-travel graduated dial division, mm
0,05
Longitudinal feed range, mm/rev
0,05..2.8
Cross-feed range, mm/rev
0,025..1,4
Number of longitudinal feeds
42
Number of transverse feeds
42
Metric thread pitch range, mm
0,5..112
Inch thread pitch range, threads/inch
56..0,5
Module thread pitch range, module
0,5..112
Diametral pitch thread range, diametral pitch
56..0,5
Maximum tool force permitted by the feed mechanism - longitudinal, N
5884
Maximum tool force permitted by the feed mechanism - transverse, N
3530
Tool slide
Maximum compound slide travel, mm
150
Compound slide travel per graduated dial division, mm
0,05
Maximum tool slide swivel angle, deg
±90°
Tool slide swivel scale graduation, deg
1°
Maximum cutting tool shank cross-section, mm
25 × 25
Height from the tool support surface to the centreline (tool height), mm
25
Number of tools in the tool head
4
Tailstock
Tailstock quill diameter, mm
Tailstock quill bore taper under GOST 2847-67
Morse 5
Maximum quill travel, mm
150
Quill movement per dial division, mm
0,1
Lateral offset of the head body, mm
±15
Main drive motor, kW
11
Rapid traverse drive motor, kW
0,12
Coolant pump motor, kW
0,125
Machine dimensions and weight
Length, mm
3195
Width, mm
1190
Height, mm
1500
Distance between centres, mm
1400
Machine weight, kg
3210

Inspection and delivery

Please call before visiting to confirm the inspection location and site access.

Tell us the model, destination city and country, required configuration and timing. We will check feasibility and agree inspection, preparation, transport and documentation for your enquiry.

Delivery

Our projects

Related equipment

Let's discuss your equipment and requirements

Include the model, task, city and country. Attach photos and documents in your email or messaging app.

Call us

Send an enquiry

Include the model, task, city and country. Attach photos and documents in your email or messaging app.

WhatsApp · +7 (911) 941-00-11 Email · specmehanizm@gmail.com