- Accuracy class under GOST 8-82
- H
- Maximum workpiece diameter over the bed, mm
- 400
- Centre height above the flat bed guideways, mm
- 215
- Maximum workpiece diameter machined over the slide, mm
- 220
- Maximum workpiece length between centres, mm
- 1000
- Maximum distance from centreline to tool post edge, mm
- 225
- Maximum drill diameter when drilling steel parts, mm
- 25
- Maximum workpiece weight for machining between centres, kg
- 460..1300
- Maximum weight of workpiece machined in the chuck, kg
- 200
- Spindle
-
- Spindle bore diameter, mm
- 52
- Maximum bar diameter passing through the spindle bore, mm
- 50
- Forward spindle speed, rpm
- 12,5..1600
- Reverse spindle speed, rpm
- 19..1900
- Number of forward spindle speeds
- 22
- Number of reverse spindle speeds
- 11
- Spindle nose according to GOST 12593-72
- 6K
- Spindle tapered bore according to GOST 2847-67
- Morse 6
- Spindle flange diameter, mm
- 170
- Maximum spindle torque, Nm
- 1000
- Feeds
-
- Maximum longitudinal travel, mm
- 645, 935, 1335, 1935
- Maximum cross travel, mm
- 300
- Rapid longitudinal traverse speed, mm/min
- 3800
- Rapid cross traverse speed, mm/min
- 1900
- Maximum permissible travel speed when operating against stops, mm/min
- 250
- Minimum permissible carriage (slide) travel speed, mm/min
- 10
- Longitudinal travel dial division, mm
- 1
- Cross-travel graduated dial division, mm
- 0,05
- Longitudinal feed range, mm/rev
- 0,05..2,8
- Cross-feed range, mm/rev
- 0,025..1,4
- Number of longitudinal feeds
- 42
- Number of transverse feeds
- 42
- Metric thread pitch range, mm
- 0,5..112
- Inch thread pitch range, threads/inch
- 56..0,5
- Module thread pitch range, module
- 0,5..112
- Diametral pitch thread range, diametral pitch
- 56..0,5
- Maximum tool force permitted by the feed mechanism - longitudinal, N
- 5884
- Maximum tool force permitted by the feed mechanism - transverse, N
- 3530
- Tool slide
-
- Maximum compound slide travel, mm
- 150
- Compound slide travel per graduated dial division, mm
- 0,05
- Maximum tool slide swivel angle, deg
- ±90°
- Tool slide swivel scale graduation, deg
- 1°
- Maximum cutting tool shank cross-section, mm
- 25 × 25
- Height from the tool support surface to the centreline (tool height), mm
- 25
- Number of tools in the tool head
- 4
- Tailstock
-
- Tailstock quill diameter, mm
-
- Tailstock quill bore taper under GOST 2847-67
- Morse 5
- Maximum quill travel, mm
- 150
- Quill movement per dial division, mm
- 0,1
- Lateral offset of the head body, mm
- ±15
- Main drive motor, kW
- 11
- Rapid traverse drive motor, kW
- 0,12
- Coolant pump motor, kW
- 0,125
- Machine dimensions and weight
-
- Machine dimensions (length, width, height), distance between centres=1000, mm
- 2795 × 1190 × 1500
- Machine weight, kg
- 3010