SpecmehanizmMachine tools, repairs and CNC upgrades +7 (911) 941-00-11Call a specialist
Russia & CIS · international enquiries

Face-turning lathe, model NILES DP1 S2 (Germany)

Availability to be confirmed

Repair and major overhaul NILES DP1 S2

Discuss repairs or a major overhaul of your machine. Feasibility, site visits, costs and timing are confirmed after reviewing the task and assessing its condition.

How our repair process works
Call about repairs

Attach photos, drawings and specifications to your email or message.

Description

DP-1/S2 is a face-turning lathe manufactured by WMW NILES, Germany, designed for machining end and cylindrical surfaces on cast-iron and steel products using high-speed steel or carbide-insert tools. It is a universal machine of normal accuracy.
Used for rough and finish turning of flange, cylindrical and conical surfaces, hole enlargement and boring, facing and thread cutting, including metric, imperial and module threads, in one-off and small-batch production.

Accuracy in finish turning/according to GOST: tolerance grade IT 6 / 2-С. If required, workpieces with an outside diameter greater than 2500 mm can be machined by installing the machine on additional foundation plates; flanges with a diameter of 3500 mm have been machined in this arrangement. With a tailstock and steady rests, cylindrical rotational parts up to 10000 mm long can be machined.

Design features including modernisation:

• A wide range of spindle speeds and feeds ensures productive machining, while the rigidity of the cast bed provides a fine surface finish.
• Metric, inch and module threads can be cut.
• The tool holder design improves clamping stability.
• Special precision spindle bearings require no adjustment during operation, providing the necessary rigidity and high machining accuracy.
• The kinematic chain and the overall machine construction ensure high reliability.
• Improved electrical reliability through modern electrical control components and installation of new wiring and cable routes.
• An operator panel further improves reliability during operation.


Machine weight – 19 tonnes.

Technical specifications

Centre height above the foundation plates, mm.
1250
Swing diameter over the foundation plates, mm.
2480
Maximum workpiece weight mounted between centres, kg
10000
Maximum faceplate torque, Nm.
20000
Drive power / rated connected load, kW
45 / 55
Tool shank cross-section, mm.
50x50
Operating voltage
3×380 V / 3 phases / 50 Hz / 118 A
Spindle head
Working spindle diameter at the front bearing, mm.
240
Working spindle bore, mm.
100
Internal taper 1, mm
10
Number of faceplate speeds
18
Spindle speed series ratio
1,28
- Speed series 1
55 – 180
- Number of spindle speeds 2
4,5 – 224
- Number of spindle speeds 3
5,6 – 280
- Number of spindle speeds 4
7,1 – 355
Faceplate
Faceplate outside diameter, mm.
1250
Minimum clamping diameter for external/internal clamping, mm.
180/400
Maximum clamping diameter for external/internal clamping, mm.
1000/1250
Longitudinal slide — bed length, mm.
1200
Cross slide, mm.
750
Extended cross slide, mm.
630
Tool feed slide, mm.
180
Swing over the bed, mm.
1250
Swing diameter over the longitudinal slide.
800
Feed mechanism
Number of feeds independent of spindle speed, pcs
18
Spindle-speed-independent feed range, mm/min
0,5...180
Number of feeds dependent on feed drive speed
24
Overall range of spindle-speed-dependent feeds, mm/rev
- 0,0056...16 - 0,0045...12,5
Longitudinal and transverse rapid traverse, mm/min
5000
Threading device (standard pitch)
- Metric thread, mm.
1...60 (48)
- Imperial thread, lead
24...0,5
- Module thread, mm
0,5...20
Large-pitch threading device (150%)
- Metric thread, mm.
150
- Imperial thread, lead
3 / 16
- Module thread, mm.
44

Inspection and delivery

Please call before visiting to confirm the inspection location and site access.

Tell us the model, destination city and country, required configuration and timing. We will check feasibility and agree inspection, preparation, transport and documentation for your enquiry.

Delivery

Our projects

Related equipment

Let's discuss your equipment and requirements

Include the model, task, city and country. Attach photos and documents in your email or messaging app.

Call us

Send an enquiry

Include the model, task, city and country. Attach photos and documents in your email or messaging app.

WhatsApp · +7 (911) 941-00-11 Email · specmehanizm@gmail.com