Major overhaul: ВМ127М
Milling machine overhaul
Work carried out
We repaired the mechanical systems and replaced the electrical equipment.
Result and verification
We checked table geometry and all operating modes, and carried out heavy-cutting tests. The machine was accepted and shipped to the customer.
ВМ-127М vertical knee-type milling machine, manufactured in 1989. Our team overhauled the mechanical systems and replaced the electrical equipment in the year covered by this case study.
The machine was accepted and shipped to the customer.
- The machine was demonstrated in all operating modes;
- Heavy-cutting tests were carried out;
- Technical accuracy was verified. Deviation from parallelism of the table surface relative to its longitudinal and transverse travel, and deviation from perpendicularity of the table surface relative to its vertical travel in the longitudinal and transverse planes, did not exceed 15 microns.
The photographs show this actual machine.
The ВМ-127М vertical knee-type milling machine is intended for milling ferrous and non-ferrous metals and their alloys with face, end, cylindrical, radius and other cutters in series and small-batch production. The swivelling spindle head has a mechanism for manual axial movement of the spindle quill, allowing machining at angles of up to ±45° relative to the table surface. The machine can mill vertical, horizontal and inclined surfaces, slots, angles, frames and similar features. The capabilities of the ВМ-127М can be extended using a dividing head, rotary or universal tilting table, vice and other fixtures.
Main design features:
- The designed rigidity and mass of the main assemblies provide high machining accuracy;
- Strengthened guideways provide long service without changes to machine characteristics;
- The powerful main drive and carefully selected transmission ratios provide suitable machining conditions for different cutting operations and make full use of the cutting tool's capabilities.
Standard equipment supplied with the machine:
- EMZI shank — 1 item;
- Handles — 1 set;
- Coolant pump — 1 item;
- Coolant fittings — 1 set;
- Electronic documentation — 1 set.
| Technical specifications | |
|---|---|
| Table working surface dimensions, mm | 400×1600 |
| Maximum table travel, mm: | |
| longitudinal | 1000 |
| transverse | 320 |
| vertical | 420 |
| Distance from vertical spindle face to table working surface, mm | 30-500 |
| Main spindle-speed range, min-1 | 40-2000 |
| Feed ranges, mm/min: | |
| Longitudinal | 25-1250 |
| Transverse | 25-1250 |
| Vertical | 8,3-416,6 |
| from spindle axis to the bed's vertical guideways | 420 |
| Number of spindle speeds | 18 |
| Feed ranges, mm/min: | |
| longitudinal | 25-1250 |
| transverse | 25-1250 |
| vertical | 8,3-416,6 |
| Motor power, kW: | |
| main drive | 11 |
| feed drive | 3 |
| Workpiece weight including fixture, kg | 300 |
| Overall dimensions, mm | 2560×2260×2500 |
| Weight, kg | 4250 |







