Major overhaul and modernisation: ИЖ250ИТП
The ИЖ250ИТП screw-cutting lathe was manufactured at the Izhmash plant (Izhevsk). Our company completed a major overhaul and modernisation, including manufacturing an entirely new electrical cabinet and replacing wiring and cable runs.
- Run-in and operational checks completed in all modes;
- Accuracy checked: taper over a turned workpiece length of 160 mm was 5 microns.
A universal screw-cutting toolroom lathe of enhanced accuracy. Designed for various turning operations in three- or four-jaw chucks, between centres or in collet chucks, machining workpieces made of metals, plastics and other materials. Used for finishing and semi-finishing external cylindrical and conical surfaces, enlarging and boring holes, facing and cutting metric, inch and module threads in one-off and small-batch production.
Design features:- A wide range of spindle speeds and feeds ensures productive machining, while the rigidity of the cast bed provides a fine surface finish.
- The spindle speed preselection mechanism allows speeds to be changed while the machine is operating.
- The universal feed gearbox enables metric, imperial and module threads to be cut without changing gears in the change-gear train.
- Feeds are controlled with a handle whose engagement direction matches the selected movement direction of the slide and tool head.
- Backlash-free tool head locking ensures high rigidity and positioning accuracy.
- The leadscrew is lubricated automatically during thread cutting.
- The spindle assembly design allows rapid replacement of drive belts without dismantling the assembly.
- The machine bed is made of chromium-nickel cast iron; the guideways are induction-hardened and ground.
- The stop mechanism in the apron protects the feed mechanisms from overload and allows turning against a fixed stop.
| Machine technical specifications: | ИЖ250ИТП |
|---|---|
| Accuracy class under GOST 8-82 | П |
| Maximum workpiece length, mm | 500 |
| Maximum workpiece diameter, mm: | |
| Over the bed | 240 |
| Over the carriage | 168 |
| Maximum bar diameter passing through the spindle bore, mm | 24 |
| Maximum tool shank cross-section, mm | 16x16 |
| Spindle nose according to GOST 12593-72 | 4К |
| Spindle internal taper size under GOST 25557-82 | Morse 4 |
| Tailstock quill internal taper size | Morse 3 |
| Quill travel, mm | 85 |
| Spindle speed, rpm | 63-3150 |
| Longitudinal feed, mm/rev | 0.01-1.5 |
| Cross-feed, mm/rev | 0.005-0.75 |
| Thread pitch: | |
| Metric threads, mm | 0,2-24 |
| Module threads, modules | 0.2-6 |
| Imperial thread, threads per inch | 24-1 |
| Main drive power, kW | 3 |
| Overall dimensions, mm: | |
| Length, mm | 1790 |
| Width, mm | 810 |
| Height, mm | 1400 |
| Machine weight, kg | 1180 |









