Major overhaul and modernisation: 6Т83Ш-40
Universal knee-type milling machine, model 6Т83Ш-40, manufactured in 1996 by ЗЕВС. Our company performed a major overhaul of the mechanical components and modernisation of the electrical control system this year, including a new electrical cabinet, controller installation and replacement of cable routes, electrical clutches, conduits and electric motors.
The machine was accepted and shipped to the Customer.
• Machine operation demonstrated in all modes;
• Heavy-duty cutting trials completed;
• Machining accuracy acceptance check completed. Deviation from parallelism of the table working surface to its longitudinal and transverse travel paths, and deviation from perpendicularity of the table working surface to its vertical travel path in longitudinal and transverse planes, do not exceed 20 microns.
The photographs show this particular machine.
The universal milling machine, model 6Т83Ш-40, is designed for a variety of milling, drilling and boring operations using cylindrical, face, end, form and other cutters. It is used to machine horizontal and vertical surfaces, slots, frames, angles, gears, helices, die patterns, moulds and other parts made of steel, cast iron, non-ferrous metals, their alloys and other materials.
The machine is equipped with an overarm carrying attached and swivel spindle heads with their own speed gearbox and separate drive. This design allows workpieces to be machined at different angles. A separate powered horizontal spindle allows the machine to be used for horizontal milling.
The drive power and high machine rigidity allow the use of high-speed steel cutters and tools fitted with carbide and superhard synthetic inserts.
Main design advantages of the machine:
• Integrated modern controller;
• Powered tool clamping in the spindle;
• A device for periodic adjustment of backlash in the longitudinal feed screw pair;
• Safety clutch protecting the feed drive from overload;
• Spindle braking by an electromagnetic clutch when stopping;
• Capability to control electromagnetic clutch parameters.
Main machining advantages:
• Wide range of spindle speeds and table feeds;
• High drive power;
• Enhanced accuracy class;
• Simultaneous operation of both spindles;
• High rigidity;
• Reliability and durability.
The machine's capabilities can be expanded using a dividing head, rotary table or tilting rotary table.
| Technical specifications: | |
| Table working surface dimensions, mm | 1600×400 |
| Maximum table travel, mm: | |
| Longitudinal | 420 |
| Transverse | 400 |
| Vertical | 420 |
| Electromagnetic clutch parameter control | Provided |
| Distance from the horizontal spindle axis to the working surface of the table, mm | 30-450 |
| Spindle speed range, min-1 | 31,5-1600 |
| Table feed range, mm/min: | |
| Longitudinal | 12,5-1600 |
| Transverse | 12,5-1600 |
| Vertical | 4,1-530 |
| Table rapid traverse, mm/min: | |
| Longitudinal | 4000 |
| Transverse | 4000 |
| Vertical | 1330 |
| Drive motor power, kW: | |
| Main spindle | 11 |
| Table feeds | 3 |
| Vertical head | 3 |
| Spindle taper under GOST 30064-93 | |
| Main | ISO 50 |
| Vertical head | ISO 40 |
| Maximum table drive thrust, N: | |
| Longitudinal and transverse | 40000 |
| Vertical | 25000 |
| Overall dimensions, mm: length | 2320 |
| Width | 1975 |
| Height | 1970 |
| Machine weight including electrical equipment, kg | 4600 |










