Major overhaul and modernisation: 6Р82Ш
CNC vertical milling machine, model 6Р13Ф3 (ГФ2171С5 with the tool magazine and tool-changing device removed). Our company completed Comprehensive major overhaul And modernisation.
Modernisation Including replacement of control systems, wiring, cable routes and flexible metal conduits.
- Running-in and operational checks completed in all modes;
- The machine was handed over to the customer following quantity, quality, operational and technical accuracy checks.
The photographs show this particular machine.
The universal knee-type milling machine, model 6Р82Ш, is designed for various milling operations in one-off, small-batch and batch production. Such machines can manufacture metal patterns, dies, moulds, templates, cams and similar parts.
To machine various surfaces and large parts whose dimensions exceed the table size, the spindle head is mounted on an extendable overarm and can swivel to any angle in two mutually perpendicular planes.
The machine's horizontal spindle can machine flat surfaces using face and cylindrical cutters. Both spindles can operate separately or simultaneously. With an arbor support installed, the machine can be used as a conventional horizontal milling machine.
The machine's capabilities can be extended with a dividing head, rotary table and other fixtures. Its specifications and rigidity allow the full capabilities of high-speed steel and carbide tools to be used.
| Specifications | |
|---|---|
| Table working surface dimensions, mm | 1250x320 |
| Number of T-slots | 3 |
| Maximum table travels, mm | |
| Longitudinal (powered / manual) | 800/800 |
| Transverse (powered/manual) | 240/250 |
| Vertical (powered / manual) | 410/420 |
| Minimum and maximum distance from spindle axis to table working surface, mm | 30-450 |
| Distance from spindle axis to overarm, mm | 155 |
| Distance from the swivel head spindle face to the table, mm | 35-535 |
| Distance from swivel head spindle axis to bed guideways, mm | 260-280 |
| Table travel per graduated dial division (longitudinal, transverse, vertical), mm | 0,05 |
| Table travel per revolution of the graduated dial, mm | |
| Longitudinal and transverse | 6 |
| Vertical | 2 |
| Maximum workpiece weight, kg | 250 |
| Maximum spindle quill travel, mm | 80 |
| Head swivel in the table cross plane, degrees: | |
| To the bed | 45 |
| From the bed | 90 |
| Head swivel angle in the table's longitudinal plane, deg | 360 |
| Attached head swivel angle, degrees. | 360 |
| Horizontal spindle size under GOST 15945-70 | 50 |
| Spindle size of the swivelling and attachment heads under GOST 15945-70 | 40 |
| Main drive motor power, kW | 7,5 |
| Machine overall dimensions, mm: | |
| Length | 2470 |
| Width | 1950 |
| Height | 1950 |
| Machine weight, kg | 3300 |







