Major overhaul and modernisation: 2620В
Horizontal boring machine, model 2620В (Sverdlov Plant). Our company completed a comprehensive major overhaul of the mechanical system and modernisation, replacing absolutely all cable runs, wiring and electrical control equipment, and installing a feed servo motor, variable-frequency main drive, operator panel and digital readout for 4 axes, including spindle movement.
The machine was accepted and shipped to the Customer.
The machine was accepted and shipped to the Customer.
- Machine operation demonstrated in all modes;
- Machining accuracy acceptance completed according to the technical documentation.
The 2620В horizontal boring machine is designed for high-precision machining of diameters in housings and accurate centre distances between their reference holes.
The horizontal boring machine, model 2620В, enables:
- Machine cylindrical holes using either axial spindle feed or longitudinal table feed;
- Mill part end faces using table cross-feed or vertical spindle head feed;
- Machine part end surfaces with a cutting tool;
- Turn grooves or bore recesses inside holes using radial slide feed;
- Cut threads with a turning tool using either axial spindle feed or the radial slide;
- Use advanced tools for drilling, boring, core drilling and reaming holes.
Features of the horizontal boring machine, model 2620В, including modernisation.
- High rigidity provided by the machine's weight, bed width, front column cross-section, rotary table, saddle, guideway widths and boring spindle diameter, as well as precision preloaded bearings and clamping mechanisms for all moving assemblies;
- High vibration resistance due to improved spindle supports, a shorter rear section of the spindle head and a balanced main motor;
- High machining accuracy achieved through tighter manufacturing tolerances on main machine parts, improved wear resistance of sliding surfaces, and a modern 4-axis digital readout with optical and digital scales;
- The feed servo drive and main drive frequency controller significantly improve control efficiency and expand the ranges of stepless feed and spindle speed adjustment;
- Improved reliability through electrical control equipment based on modern components, integration of a controller and an operator panel into the system architecture, and installation of entirely new copper wiring and cable runs.
| Technical specifications: | |
|---|---|
| Spindle head and spindle: | |
| Spindle diameter, mm | 90 |
| Maximum horizontal (axial) spindle travel, mm | 710 |
| Maximum vertical spindle head travel, mm | 1000 |
| Spindle head rapid traverse, m/min | 2,2 |
| Spindle speed, rpm | 12,5...1600 |
| Number of spindle speeds | 22 |
| Spindle torque, Nm | 3000 |
| Maximum spindle boring diameter, mm | 320 |
| Maximum drill diameter (by taper), mm | 65 |
| Faceplate and radial slide: | |
| Faceplate diameter, mm | 630 |
| Faceplate speed, rpm | 8..200 |
| Maximum faceplate slide travel, mm | 170 |
| Maximum boring diameter using the faceplate slide, mm | 600 |
| Maximum boring and turning length using the faceplate slide, mm | 400 |
| Facing diameter using the faceplate slide, mm | 550 |
| Rotary table | |
| Rotary table dimensions, mm | 1120×1250 |
| Maximum travel (longitudinal, transverse) | 1120, 1000 |
| Rotary table load capacity, kg | 3000 |
| Number of table T-slots, pcs | 7 |
| General | |
| Main drive power, kW | 10 |
| Machine overall dimensions, mm | 5700 × 3400 × 3000 |
| Weight, kg | 12500 |










