Major overhaul and modernisation: 2620
Horizontal boring machine, model 2620 (Sverdlov Plant). Our company completed a major overhaul of the mechanical system and modernisation, replacing absolutely all cable runs, wiring and electrical control equipment, and installing a feed servo motor, variable-frequency main drive, operator panel and digital readout for 4 axes, including spindle movement.
The machine was accepted and shipped to the Customer.
- Machine operation demonstrated in all modes;
- Technical accuracy acceptance tests completed.
The photographs show this particular machine.
The horizontal boring machine, model 2620, is designed for high-precision machining of diameters in casing parts and accurate centre distances between their reference holes.
The 2620 horizontal boring machine enables:
- Machine cylindrical holes using either axial spindle feed or longitudinal table feed;
- Mill part end surfaces using transverse table feed or vertical spindle head feed;
- Machine part end faces with a turning tool;
- Turn grooves or bore recesses inside holes using radial slide feed;
- Cut threads with a turning tool using either axial spindle feed or the radial slide;
- Use advanced tools for drilling, boring, core drilling and reaming holes.
Features of the 2620 horizontal boring machine, including modernisation.
- High rigidity provided by the machine's weight, bed width, front column cross-section, rotary table, saddle, guideway widths and boring spindle diameter, as well as precision preloaded bearings and clamping mechanisms for all moving assemblies;
- High vibration resistance due to improved spindle supports, a shorter rear section of the spindle head and a balanced main motor;
- High machining accuracy achieved through tighter manufacturing tolerances on main machine parts, improved wear resistance of sliding surfaces and use of Modern 4-axis digital readout, optical and digital scales;
- Control efficiency and stepless feed and spindle speed ranges have been significantly improved through installation of Servo feed drive and variable-frequency main drive controller;
- Improved reliability through installation of Electrical control equipment based on modern components, switching on Controller and machine operator panel Into the system architecture, Installation of entirely new copper wiring and cable runs.
| Technical specifications: | |
| Spindle head and spindle: | |
| Spindle diameter, mm | 90 |
| Maximum horizontal (axial) spindle travel, mm | 710 |
| Maximum vertical spindle head travel, mm | 1000 |
| Spindle head rapid traverse, m/min | 2,2 |
| Spindle speed, rpm | 12,5...1600 |
| Number of spindle speeds | 23 |
| Spindle torque, Nm | 3000 |
| Maximum spindle boring diameter, mm | 320 |
| Maximum drill diameter (by taper), mm | 65 |
| Faceplate and radial slide: | |
| Faceplate diameter, mm | 630 |
| Faceplate speed, rpm | 8..200 |
| Maximum faceplate slide travel, mm | 170 |
| Maximum boring diameter using the faceplate slide, mm | 600 |
| Maximum boring and turning length using the faceplate slide, mm | 400 |
| Facing diameter using the faceplate slide, mm | 550 |
| Rotary table: | |
| Rotary table dimensions, mm | 1120×900 |
| Maximum travel (longitudinal, transverse) | 1150, 1000 |
| Rotary table load capacity, kg | 2000 |
| Number of table T-slots, pcs | 7 |
| General: | |
| Main drive power, kW | 10 |














