Major overhaul and modernisation: 1М63Б, distance between centres — 2800
The screw-cutting lathe, model 1М63Б, was manufactured at the Ryazan Machine Tool Plant. Our company performed a major overhaul and modernisation, including a completely new electrical cabinet and replacement of wiring and cable routes.
- Run-in and operational checks completed in all modes;
- Accuracy checked: taper over a turned workpiece length of 200 mm was 0.01 mm;
The photographs show this particular machine.
The 1М63Б screw-cutting lathe with a distance between centres of 2800, manufactured by РСЗ, is a universal machine of normal accuracy. It is designed for various turning operations in three- or four-jaw chucks, between centres or in collet chucks, machining workpieces made of metals, plastics and other materials. Used for finishing, semi-finishing and roughing external cylindrical and conical surfaces, enlarging and boring holes, facing and cutting metric, inch and module threads in one-off and small-batch production.
Design features:
The specifications and rigid machine design allow its full capabilities to be used to ensure surface finish and accuracy when machining ferrous and non-ferrous metals and plastics.
Tool post slide Has powered travel for taper turning.
Travel of the slide carriage, cross slide and tool holder carriage Can be manual or powered, at feed or rapid traverse speeds. The transverse screw mechanism with two nuts allows adjustment to eliminate backlash.
Rapid tool slide traverse is provided From a separate electric motor.
Spindle braking occurs automatically when the friction clutch is disengaged.
| Machine technical specifications: | 1М63Б, distance between centres — 2800 |
|---|---|
| Maximum workpiece diameter, mm: | |
| Mounted over the bed | 700 |
| Machined over the bed | 630 |
| Machined over the carriage | 350 |
| Maximum workpiece length, mm | 1500 |
| Headstock spindle nose size according to DIN | 8 |
| Number of spindle speed steps | 22 |
| Cylindrical spindle bore diameter, mm | 76 |
| Spindle speed range, rpm | 10…1250 |
| Carriage cutting feed range, mm/rev: | |
| Longitudinal | 0,033…5,6 |
| Transverse | 0,013…2,064 |
| Compound slide | 0,010…1,76 |
| Thread pitch ranges: | |
| Metric, mm | 1-224 |
| Imperial threads, number of threads per 1″ | 28-0,25 |
| Module threads, module | 0,25-56 |
| Diametral-pitch threads, pitch | 112-0,5 |
| Carriage rapid traverse, m/min: | |
| Longitudinal | 5,2 |
| Transverse | 2 |
| Maximum workpiece weight, kg | 3500 |
| Main drive power, kW | 15 |
| Overall dimensions, mm: | |
| Length | 3750 |
| Width | 1780 |
| Height | 1550 |
| Weight, kg | 4840 |








