Major overhaul and modernisation: 16М30Ф3 с ЧПУ NC-210
Screw-cutting lathe, model 16М30Ф3, with NC-210 CNC — manufactured in 1992. Major overhaul of the mechanical components. Modernisation (replacement of electrical equipment, control systems, sensors, CNC cable routes and drives). Repairs and modernisation were performed by our company this year.
The machine was accepted and shipped to the Customer.
• Machine operation demonstrated in all modes;
• Heavy-duty cutting trials completed;
• Machining accuracy acceptance completed (taper over a turned workpiece length of 250 mm does not exceed 10 microns).
Work completed:
Modernisation:
• Removal of old electrical components, electrical control equipment, drive boards, CNC control and wiring;
• Washing, cleaning and painting the electrical cabinet;
• Installation of new electrical equipment, control systems, wiring, drives, CNC control, sensors and cable routes;
• Programming;
• Adjustment and debugging.
Major overhaul:
• Disassembly and washing of assemblies;
• Restoring the bed, slide and tailstock guideway surfaces by hand scraping using spotting blue;
• Mechanism repairs:
- Replacement of all bearings and bushes;
- Replacement of worn gears (mandatory if deformed or cracked, if mounting seats are worn, or if teeth are worn or chipped);
- Replacement of worn shafts (mandatory for deformation, cracks, worn bearing fits or worn splines; for pinion shafts, worn or chipped teeth);
• Tailstock repair;
• Repairing pumps and fittings in the lubrication and cooling systems;
• Repair of the electromechanical tool changer;
• Ball screw repair;
• Electric motor repairs;
• Assembly. No-load running-in at all speeds and feeds, checking noise and temperature rise;
• Preparation for painting (washing surfaces), cleaning the coolant tank and painting surfaces with durable paints;
• Headstock alignment;
• Tailstock alignment (centre height adjustment);
• Workpiece turning (turning under load, finish turning), accuracy inspection.
12-month warranty.
The 16М30Ф3121 (16М30Ф3) CNC screw-cutting lathe is designed to turn rotational parts with stepped, simple and curved profiles. It is a more modern equivalent of the 16К30Ф3 and can cut virtually any thread, drill, bore and perform many other operations. It is used in small-batch and batch production in mechanical engineering, instrument manufacturing, general construction and other enterprises. This 16М30Ф3 machine has been fully modernised with a modern NC-210 CNC system, ArtTech SDC1V DC feed drives, an ArtTech MDC2 DC main drive, electrical control equipment and circular interpolation sensors.
Main machine design features:
• The designed rigidity of the main machine assemblies ensures high machining accuracy;
• Hydraulic tailstock quill movement, pedal-operated;
• The heavy-duty four-position tool post accommodates up to eight tool blocks;
• Structurally strengthened guideways ensure long service without changes in machine characteristics;
• High-speed feed drives with feedback support a wide range of cutting conditions;
• An electromechanical chip conveyor is provided;
• The addition of a USB port has greatly simplified program editing and saving.
The standard machine package includes:
• Self-centring three-jaw chuck, diameter 400 (500) mm, with one set of jaws;
• Tool blocks — 4 units;
• Chuck key — 1 unit;
• Tool holder key – 1 pc;
• Conveyor — 1 pc;
• Documentation in electronic format — 1 set.
| Technical specifications: | |
| Machine accuracy class under GOST 8—82 | П |
| CNC control model | NC-210 |
| Maximum workpiece diameter over the bed, mm | 670 |
| Maximum workpiece diameter over the slide, mm | 320 |
| Maximum workpiece length, mm | 1500 |
| Speed gearbox | |
| Maximum bar diameter passing through the spindle bore, mm: | 80 |
| Stepless spindle speed adjustment | Yes |
| Number of spindle speed ranges | 3 |
| Spindle speed range, rpm | 8-2000 |
| Spindle taper for chuck mounting | 11М |
| Slide | |
| Maximum slide travel: longitudinal / transverse, mm | 1260/ 330 |
| Height of the tool mounted in the tool post, mm | 32 |
| Maximum number of tools mounted in the tool post | 8 |
| Carriage cutting feed speed range (longitudinal/transverse), mm/min | 1-6000 |
| Tailstock | |
| Tailstock spindle taper | |
| Tailstock spindle taper | Morse 6 |
| Maximum quill travel, mm | 240 |
| Maximum hydraulically driven quill travel, mm | 100 |
| Control system | |
| CNC system designation | NC-210 |
| Number of controlled axes (total / simultaneous) | 2/2 |
| Machine electrical equipment and drives | |
| Power supply | 380 V, 50 Hz |
| Number of electric motors on the machine | 7 |
| Main drive motor, kW | 30 |
| Longitudinal and transverse feed motors, kW | 8+8 |
| Tool post motor, kW/rpm | 0,5/ 1415 |
| Lubrication unit motor, kW/rpm | 1,5/ 1440 |
| Coolant pump motor, kW/rpm | 0,12/2800 |
| Conveyor motor, kW / rpm | 1,5/ 1440 |
| Total machine power, kW | 50 |
| Machine dimensions and weight | |
| Length | 5290 |
| Width | 3875 |
| Height | 2130 |
| CNC machine weight, kg | 8000 |










