SpecmehanizmMachine tools, repairs and CNC upgrades +7 (911) 941-00-11Call a specialist
Russia & CIS · international enquiries

Major overhaul and modernisation: 16К30Ф3 with NC-202 CNC, version 2

Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2

Major overhaul of the mechanical components. Modernisation (replacement of electrical equipment, control systems, sensors, cable routes, CNC control, drives, electric motors, wiring and flexible metal conduits). Repairs and modernisation were performed by our company.

  • Running-in and heavy cutting tests completed;
  • Machine accuracy checked: taper over a turned workpiece length of 250 mm was — 0.01 mm,
  • When facing a Ø250 mm workpiece, deviation (concavity) is 0.01 mm;
  • Machine operation demonstrated in all modes;
  • Machine acceptance completed. The machine has been shipped to the Customer.
The photographs show this particular machine.

Work completed:

Modernisation:
  • Removal of old electrical equipment, control systems, drive boards, CNC control, wiring and cable routes;
  • Washing, cleaning and painting the electrical cabinet;
  • Installation of new electrical components, electrical control equipment, wiring, drives, CNC control, sensors and cable runs;
  • Programming;
  • Adjustment and debugging.
Major overhaul:
  • Disassembly and washing of assemblies;
  • Restoration of bed, cross-slide and tailstock guideway surfaces by manual scraping using marking blue;
  • Mechanism repairs:
    - Replacement of all bearings and bushes;
    - Replacement of worn gears (mandatory if deformed or cracked, if mounting seats are worn, or if teeth are worn or chipped);
    - Replacement of worn shafts (mandatory if deformed or cracked, if bearing seats or splines are worn, or, for integral pinion shafts, if teeth are worn or chipped);
  • Tailstock repair;
  • Repair of pumps and fittings in the lubrication and cooling systems;
  • Repair and adjustment of the hydraulic power unit; replacement of pressure gauges;
  • Repair of the electromechanical tool-changing device;
  • Repair of ball screws and replacement where required;
  • Replacement of electric motors;
  • Assembly. No-load running-in at all speeds and feeds, checking noise and temperature rise;
  • Preparation for painting (washing surfaces), cleaning the coolant tank and painting individual assemblies with durable paints;
  • Headstock alignment;
  • Tailstock alignment;
  • Workpiece turning (heavy-duty turning, finish turning), accuracy inspection.

The 16К30Ф3 screw-cutting lathe with NC-202 CNC control, version 2, is designed for turning rotational parts with stepped, simple and curved profiles. It can cut practically any thread, drill, bore and perform many other operations. It offers exceptionally high positioning accuracy. It is used in small-batch and batch production in mechanical engineering, instrument-making, general construction and other enterprises. This machine has been fully modernised with a modern digital NC-202 CNC control, Chinese-made servo feed drives and a DC main drive.

Main machine design features:
  • The designed rigidity of the main machine assemblies ensures high machining accuracy;
  • Hydraulic tailstock quill movement, pedal-operated;
  • The heavy-duty four-position tool holder accommodates up to eight tool blocks;
  • High-speed servo feed drives provide high positioning accuracy;
  • An electromechanical chip conveyor is provided;
  • The digital CNC control significantly improved accuracy.
The standard machine package includes:
  • Self-centring three-jaw chuck, diameter 400 (500) mm, with one set of jaws;
  • Tool blocks — 4 units;
  • Chuck key – 1 pc;
  • Tool post key — 1 unit;
  • Conveyor — 1 unit;
  • Electronic documentation – 1 set.

Specifications 16К30Ф3
Machine accuracy class under GOST 8—82 П
CNC control model NC-202
Maximum workpiece diameter over the bed, mm 670
Maximum workpiece diameter over the slide, mm 320
Maximum workpiece length, mm 1500
Speed gearbox
Maximum bar diameter passing through the spindle bore, mm: 80
Stepless spindle speed adjustment Yes
Number of spindle speed ranges 3
Spindle speed range, rpm 8-2000
Spindle taper for chuck mounting 11М
Slide
Maximum slide travel: longitudinal / transverse, mm 1260/330
Height of the tool mounted in the tool post, mm 32
Maximum number of tools mounted in the tool post 8
Carriage cutting feed speed range (longitudinal/transverse), mm/min 1-6000
Tailstock
Control principle Hydraulic
Tailstock spindle taper Morse 6
Maximum quill travel, mm 240
Maximum hydraulically driven quill travel, mm 100
Control system
CNC system designation NC-202
Number of controlled axes (total / simultaneous) 2/2
Machine electrical equipment and drives
Power supply 380 V, 50 Hz
Number of electric motors on the machine 7
Main drive motor, kW 30
Longitudinal and transverse feed motors, kW 8+8
Tool post motor, kW/rpm 0,5/ 1415
Lubrication unit motor, kW/rpm 1,5/ 1440
Coolant pump motor, kW/rpm 0,12/2800
Conveyor motor, kW / rpm 1,5/ 1440
Total machine power, kW 50
Machine dimensions and weight
Length 5290
Width 3875
Height 2130
CNC machine weight, kg 7700
Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2Chuck-and-centre lathe, model 16К30Ф3, with NC-202 CNC control, version 2
Call a specialist

Let's discuss your equipment and requirements

Include the model, task, city and country. Attach photos and documents in your email or messaging app.

Call us

Send an enquiry

Include the model, task, city and country. Attach photos and documents in your email or messaging app.

WhatsApp · +7 (911) 941-00-11 Email · specmehanizm@gmail.com