Major overhaul and modernisation: 16К30Ф3 with NC-202 CNC, version 1
16К30Ф3 screw-cutting lathe with NC-202 CNC control, version 1. Major overhaul of the mechanical components. Modernisation (replacement of electrical equipment, control systems, sensors, cable routes, CNC control, drives, electric motors, wiring and flexible metal conduits). Repairs and modernisation were performed by our company.
- Running-in and heavy cutting tests completed;
- Machine accuracy checked: taper over a turned workpiece length of 250 mm was — 0.01 mm,
- When facing a Ø250 mm workpiece, deviation (concavity) is 0.01 mm;
- Machine operation demonstrated in all modes;
- Machine acceptance completed. The machine has been shipped to the Customer.
The photographs show this particular machine.
Work completed:
Modernisation:
- Removal of old electrical equipment, control systems, drive boards, CNC control, wiring and cable routes;
- Washing, cleaning and painting the electrical cabinet;
- Installation of new electrical components, electrical control equipment, wiring, drives, CNC control, sensors and cable runs;
- Programming;
- Adjustment and debugging.
Major overhaul:
- Disassembly and washing of assemblies;
- Restoration of bed, cross-slide and tailstock guideway surfaces by manual scraping using marking blue;
- Mechanism repairs:
- Replacement of all bearings and bushes;
- Replacement of worn gears (mandatory for deformation, cracks, worn fits, worn teeth or chipped teeth);
- Replacement of worn shafts (mandatory for deformation, cracks, worn bearing fits or worn splines; for pinion shafts, worn or chipped teeth);
- Tailstock repair;
- Repair of pumps and fittings in the lubrication and cooling systems;
- Repair and adjustment of the hydraulic power unit; replacement of pressure gauges;
- Repair of the electromechanical tool-changing device;
- Repair of ball screws and replacement where required;
- Replacement of electric motors;
- Assembly. No-load running-in at all speeds and feeds, checking noise and temperature rise;
- Preparation for painting (washing surfaces), cleaning the coolant tank and painting individual assemblies with durable paints;
- Headstock alignment;
- Tailstock alignment;
- Workpiece turning (heavy-duty turning, finish turning), accuracy inspection.
The 16К30Ф3 screw-cutting lathe with NC-202 CNC control is designed to turn rotational parts with stepped, simple and curved profiles, cut virtually any thread, drill, bore and perform many other operations. It provides exceptionally high positioning accuracy. It is used in small-batch and batch production in mechanical engineering, instrument manufacturing, general construction and other enterprises. The machine has been fully modernised with a modern digital NC-202 CNC control, Chinese-made feed servo drives and a DC main drive.
Main machine design features:- The designed rigidity of the main machine assemblies ensures high machining accuracy;
- Hydraulic tailstock quill movement, pedal-operated;
- The heavy-duty four-position tool holder accommodates up to eight tool blocks;
- High-speed servo feed drives provide high positioning accuracy;
- An electromechanical chip conveyor is provided;
- The digital CNC control significantly improved accuracy.
- Self-centring three-jaw chuck, diameter 400 (500) mm, with one set of jaws;
- Tool blocks — 4 units;
- Chuck key – 1 pc;
- Tool post key — 1 unit;
- Conveyor — 1 unit;
- Electronic documentation – 1 set.
| Specifications | 16К30Ф3 |
|---|---|
| Accuracy class | П |
| CNC control model | NC-202 |
| Maximum workpiece diameter over the bed, mm | 670 |
| Maximum workpiece diameter over the slide, mm | 320 |
| Maximum workpiece length, mm | 1500 |
| Speed gearbox | |
| Maximum bar diameter passing through the spindle bore, mm: | 80 |
| Stepless spindle speed adjustment | Yes |
| Number of spindle speed ranges | 3 |
| Spindle speed range, rpm | 8-2000 |
| Spindle taper for chuck mounting | 11М |
| Slide | |
| Maximum slide travel: longitudinal / transverse, mm | 1260/330 |
| Height of the tool mounted in the tool post, mm | 32 |
| Maximum number of tools mounted in the tool post | 8 |
| Carriage cutting feed speed range (longitudinal/transverse), mm/min | 1-6000 |
| Tailstock | |
| Control principle | Hydraulic |
| Tailstock spindle taper | Morse 6 |
| Maximum quill travel, mm | 240 |
| Maximum hydraulically driven quill travel, mm | 100 |
| Control system | |
| CNC system designation | NC-202 |
| Number of controlled axes (total / simultaneous) | 2/2 |
| Machine electrical equipment and drives | |
| Power supply | 380 V, 50 Hz |
| Number of electric motors on the machine | 7 |
| Main drive motor, kW | 30 |
| Longitudinal and transverse feed motors, kW | 8+8 |
| Tool post motor, kW/rpm | 0,5/ 1415 |
| Lubrication unit motor, kW/rpm | 1,5/ 1440 |
| Coolant pump motor, kW/rpm | 0,12/2800 |
| Conveyor motor, kW / rpm | 1,5/ 1440 |
| Total machine power, kW | 50 |
| Machine dimensions and weight | |
| Length | 5290 |
| Width | 3875 |
| Height | 2130 |
| CNC machine weight, kg | 7700 |











