SpecmehanizmMachine tools, repairs and CNC upgrades +7 (911) 941-00-11Call a specialist
Russia & CIS · international enquiries

Major overhaul and modernisation: 16А20Ф3 с ЧПУ NC-202

Mechanical repair and CNC modernization

16А20Ф3

Work carried out

We restored the guideways and replaced the electrical systems and drives. An NC-202 CNC controller was installed.

Result and verification

Taper measured over a turned length of 200 mm was 0.01 mm. The machine was accepted and shipped to the customer.

Mechanical overhaul and modernization: replacement of electrical equipment, control components, sensors, cable routes, the CNC controller, drives, motors, wiring and flexible metal conduits. The repair and modernization were carried out by our team.

  • The machine was run in and tested under heavy cutting;
  • Accuracy was checked: taper over a turned length of 200 mm was 0.01 mm;
  • During facing of a workpiece with a diameter of 200 mm, deviation from flatness (concavity) was 0.01 mm;
  • The machine was demonstrated in all operating modes;
  • Acceptance and handover were completed, and the machine was shipped to the customer.
The photographs show this actual machine.

Work completed:

Modernization:
  • Removal of obsolete electrical control components, drives, the CNC controller, wiring and cable routes;
  • Washing, cleaning and painting of the electrical cabinet;
  • Installation of modern electrical control components, drives, a CNC controller and sensors, together with new wiring, cable routes and flexible metal conduits;
  • Programming;
  • Commissioning and tuning.
Overhaul:
  • Disassembly and cleaning of assemblies;
  • Restoration of bed, cross-slide and tailstock guideway surfaces by hand scraping using marking blue;
  • Repair of mechanisms:
    Replacement of all bearings and bushes;
    Replacement of worn gears, mandatory in the event of deformation, cracks, worn fits, tooth wear or chipped teeth;
    Replacement of worn shafts, mandatory in the event of deformation, cracks, worn fits or splines; for integral gear shafts, also in the event of tooth wear or chipped teeth;
  • Tailstock repair;
  • Repair of pumps and fittings in the lubrication and coolant systems;
  • Repair and adjustment of the hydraulic power unit and replacement of pressure gauges;
  • Repair of the electromechanical tool-changing device;
  • Repair of ball screws and replacement where necessary;
  • Replacement of electric motors;
  • Assembly and no-load running at all speeds and feeds, with checks for noise and overheating;
  • Preparation for painting, including surface washing, cleaning of the coolant tank and painting individual assemblies with durable paint;
  • Headstock alignment;
  • Tailstock alignment;
  • Turning a test workpiece, including heavy and finish turning, and checking accuracy.

The 16А20Ф3 screw-cutting lathe with NC-202 CNC control is designed for turning rotational components with stepped, simple and curved profiles. It can cut virtually all types of threads, drill and bore holes and perform many other operations. It provides high positioning accuracy and is used for small-batch and series production in machine-building, instrument-making, general construction and other businesses. This machine has been fully modernized with a modern digital NC-202 CNC controller, feed servo drives manufactured in China and a DC main drive.


Main design features:
  • The designed rigidity of the main assemblies and the capacity of the kinematic chain provide high machining accuracy and surface finish;
  • The tailstock quill has electromechanical movement operated by a pedal;
  • The eight-position tool post accommodates up to eight tooling blocks;
  • High-speed feed servo drives provide high positioning accuracy;
  • An electromechanical chip conveyor is fitted;
  • A CNC system with digital commands increases computing capacity for uninterrupted processing of small movements, important in high-speed machining of complex geometry. It allows the operator to see the tool path in real time and speeds up tool-to-workpiece referencing, simplifying and accelerating operation.
Standard equipment supplied with the machine:
  • A self-centring three-jaw chuck with a diameter of 250 (315) mm and one set of jaws;
  • Tooling blocks — 4 items;
  • Chuck key — 1 item;
  • Tool-post key — 1 item;
  • Conveyor — 1 item;
  • Electronic documentation — 1 set.
The work carries a warranty of 1 year.
Technical specifications:
Accuracy class P (П)
CNC model NC-202
Maximum workpiece diameter accommodated over bed, mm 500
Maximum machining diameter, mm
Over bed, mm 320
Over carriage, mm 200
Maximum machining length according to the tool head used, mm:
with an 8-position tool head 750
Maximum workpiece length between centres, mm 1000
Cylindrical spindle bore diameter, mm 55
Maximum carriage travel, mm:
transverse 210
longitudinal 905
Maximum recommended working feed speed, mm:
longitudinal 2000
transverse 1000
Number of simultaneously controlled axes 2
Commanded movement resolution, mm 0,001
Spindle-speed range, mm-1 20-2500
Maximum rapid traverse speed, mm/min:
Longitudinal 6000
transverse 6000
Power, kW 11
Overall dimensions, mm
length 3700
width 1700
height 2145
Weight, kg 4050
16А20Ф316А20Ф316А20Ф316А20Ф316А20Ф316А20Ф316А20Ф316А20Ф316А20Ф316А20Ф316А20Ф316А20Ф316А20Ф316А20Ф3
Call a specialist

Let's discuss your equipment and requirements

Include the model, task, city and country. Attach photos and documents in your email or messaging app.

Call us

Send an enquiry

Include the model, task, city and country. Attach photos and documents in your email or messaging app.

WhatsApp · +7 (911) 941-00-11 Email · specmehanizm@gmail.com