SpecmehanizmMachine tools, repairs and CNC upgrades +7 (911) 941-00-11Call a specialist
Russia & CIS · international enquiries

Wadkin Pattern Miller (Pattern Milling Machines), W.X. series multi-axis milling machine

Availability to be confirmed

Description

Specialised multi-axis woodworking milling machine for making patterns, including patterns for iron and steel castings, manufactured by Wadkin (United Kingdom). This machine is well known in all leading countries and, despite the widespread adoption of 3D printers, remains indispensable in reputable pattern-making studios and organisations.

Description of machine assemblies and components.

Horizontal arm

The horizontal arm carrying the swivelling spindle head is mounted on the column's vertical guideways and can be raised and lowered by powered or manual feed. Powered vertical movement uses a worm wheel. Manual movement uses a handwheel located directly above the swivelling spindle head.

Swivel spindle head

The swivelling spindle head is mounted on a horizontal arm and can swivel by 50° in either direction in the horizontal plane and by 20° in either direction in the vertical plane. The main angles are marked and secured by a spring-loaded plunger. Intermediate angles are secured with a locking handle. Swivelling is provided by a worm mechanism.

Spindle

The spindle head runs in large-diameter ball bearings located in the arm. It includes a quill with a fine feed. The quill feed has a spring-loaded plunger controlling feed depth and adjustment of the quill stopping limit. The spindle runs in ball bearings; the front bearing is double-row and designed for radial and cutting loads. The spindle is counterbalanced in every position, and its working end is heat-treated for easy sliding movement and wear protection. The spindle taper (Morse No. 5) has a locating screw for securing arbors.

Spindle drive and control

The cutting spindle drive is mounted on a short shaft (without belt tensioning) and has six speeds: 4200, 3000, 2100, 1700, 1500 and 850 rpm. The two speeds of 3000 and 1500 are driven directly by the motor; the other four use frequency control. Speeds are changed during operation. Reverse and an interlocked emergency stop are also provided. The spindle speed selector is located immediately above the spindle.

Work table

The work table has three directions of movement — main, transverse and rotary — controlled by handwheels. The main movement is provided by the table body travelling on low-friction rollers along the column on frame rails; a conveniently positioned lever locks the table body when required. Transverse movement is provided by the upper table section moving along the table body guideways. The table also rotates for all types of circular and radius work. A hand lever with a spring-loaded plunger locates the main angles, while intermediate angles are secured with a locking handle.


Technical specifications

Table size, mm
813x851
Maximum workpiece setting radius, mm
1525
Spindle throat (distance from the spindle axis to the column surface), mm
1248
Maximum distance from spindle face to table surface (in the vertical position), mm
483
Maximum distance from spindle axis to table surface (in the horizontal position), mm
610
Longitudinal table travel, mm
915
Transverse table travel, mm
610
Table travel (longitudinal along the rails), mm
2134
Horizontal spindle head swivel, degrees
+-50
Spindle head vertical swivel angle, deg
+-20
Spindle taper
Morse 5
Table rotation angle, degrees.
360
Number of spindle speeds
6
Speed range, rpm
850; 1500; 1700; 2100; 3000; 4200
Spindle drive motor power, kW
5
Arm traverse motor power, kW
3
Machine installation dimensions, mm
Length, mm
3620
Width, mm
3048
Height, mm
2700
Press weight, kg
3455

Inspection and delivery

Please call before visiting to confirm the inspection location and site access.

Tell us the model, destination city and country, required configuration and timing. We will check feasibility and agree inspection, preparation, transport and documentation for your enquiry.

Delivery

Related equipment

Let's discuss your equipment and requirements

Include the model, task, city and country. Attach photos and documents in your email or messaging app.

Call us

Send an enquiry

Include the model, task, city and country. Attach photos and documents in your email or messaging app.

WhatsApp · +7 (911) 941-00-11 Email · specmehanizm@gmail.com