SpecmehanizmMachine tools, repairs and CNC upgrades +7 (911) 941-00-11Call a specialist
Russia & CIS · international enquiries

Horizontal knee-type milling machine, model 6Т82Ш

Availability to be confirmed

Repair and major overhaul Horizontal knee-type milling machine, model 6Т82Ш

Discuss repairs or a major overhaul of your machine. Feasibility, site visits, costs and timing are confirmed after reviewing the task and assessing its condition.

How our repair process works
Call about repairs

Attach photos, drawings and specifications to your email or message.

Description

The 6Т82Ш universal knee-type milling machine is designed to mill a wide variety of steel, cast iron and non-ferrous metal parts using cylindrical, disc, form, angle, face, end and other cutters in one-off and batch production. Its specifications and high rigidity enable full use of both high-speed steel and carbide tools. It uses a powerful horizontal spindle for machining planes with face and cylindrical cutters, and an auxiliary vertical spindle capable of operating in different planes. Both spindles can work simultaneously. Setup for various semi-automatic and automatic cycles makes it suitable for individual operations in flow and automatic lines for large-batch production. It can machine vertical and horizontal planes, slots, angles and frames, and manufacture gears, moulds, dies and similar parts. Its capabilities can be expanded using a dividing head, round rotary table, universal attachment head and other fixtures.

This machine has numerous technical advantages, including:

  • Equipped with an overarm carrying a swivel spindle head with its own speed gearbox and separate drive, allowing the workpiece to be machined with the tool set at virtually any angle to the table working surface in any plane.
  • Wide range of spindle speeds and feeds;
  • Electromechanical tool clamping;
  • Feed reduction mechanism;
  • Capability for automatic-cycle operation;
  • Automatic lubrication of assemblies and mechanisms;
  • Feed mechanism using electromagnetic clutches;
  • Capability for simultaneous table movement along two or three axes;
  • Machine operation using control panel buttons.



  • Technical specifications

    Accuracy class under GOST 8-82
    П
    Table working surface dimensions (length x width), mm
    1250 × 320
    Minimum and maximum distance from horizontal spindle axis to table, mm
    30 - 450
    Distance from horizontal spindle axis to overarm, mm
    155
    Distance from the swivel head spindle face to the table, mm
    125 - 545
    Distance from the swivel head spindle axis to the bed guideways (throat depth), mm
    260 - 820
    Work table
    Maximum table travel (longitudinal/transverse/vertical), mm
    800/ 320/ 420
    Maximum table load, kg
    400
    Number of T-slots
    3
    Graduated dial division (longitudinal, transverse, vertical), mm
    0,05
    Table travel per revolution of the graduated dial (longitudinal and transverse), mm
    6
    Table movement per dial revolution (vertical), mm
    2
    Table rapid traverse (longitudinal / transverse / vertical), m/min
    4/ 4/ 1,3
    Number of cutting feed steps
    22
    Longitudinal and transverse table working feed ranges, mm/min
    12,5 - 1600
    Vertical table working feed range, mm/min
    4,1 - 530
    Cutting force for longitudinal, transverse and vertical feeds, N
    15,0/ 12,0/ 5,0
    Spindle
    Spindle speed of the swivelling and attachment heads, rpm
    50 - 1600
    Number of spindle speeds
    11
    Horizontal spindle speed, rpm
    31,5 - 1600
    Number of horizontal spindle speeds
    18
    Vertical spindle quill travel, mm
    80
    Spindle quill movement per dial division, mm
    0,1
    Spindle quill travel per revolution of the graduated dial, mm
    6
    Spindle head swivel towards / away from the bed, deg
    45
    Spindle head swivel in the longitudinal plane, degrees
    360
    Horizontal spindle taper
    ISO 50
    Swivelling head spindle taper
    ISO 40
    Permissible cutter diameter for roughing. Horizontal/vertical spindle, mm
    200/ 75
    Machine mechanics
    Feed disengagement stops (longitudinal, transverse, vertical)
    Available
    Interlock between manual and powered feed (longitudinal, transverse, vertical)
    Available
    Interlock for separate feed engagement
    Available
    Automatic intermittent feed (longitudinal)
    Available
    Automatic intermittent feed (transverse and vertical)
    No
    Spindle braking
    Available
    Overload protection (clutch)
    Available
    Drive and electrical equipment
    Number of electric motors on the machine
    5
    Main drive motor, kW
    7,5
    Swivelling head spindle drive motor, kW
    3,0
    Coolant pump motor, kW
    0,125
    Feed drive motor, kW
    2,2
    Tool clamping drive motor, kW
    0,18
    Total power of all motors on the machine, kW
    13,87
    Machine dimensions and weight
    Machine overall dimensions (length x width x height), mm
    2280 × 1965 × 1970
    Machine weight, kg
    3550

    Inspection and delivery

    Please call before visiting to confirm the inspection location and site access.

    Tell us the model, destination city and country, required configuration and timing. We will check feasibility and agree inspection, preparation, transport and documentation for your enquiry.

    Delivery

    Related equipment

    Universal milling machine, model 67К25Availability to be confirmed

    67К25

    Universal milling machines

    Horizontal table working surface dimensions (removable), mm
    800x320
    Vertical table (slide) working surface dimensions, mm
    630x250
    Maximum longitudinal travel (X axis), mm
    400

    Let's discuss your equipment and requirements

    Include the model, task, city and country. Attach photos and documents in your email or messaging app.

    Call us

    Send an enquiry

    Include the model, task, city and country. Attach photos and documents in your email or messaging app.

    WhatsApp · +7 (911) 941-00-11 Email · specmehanizm@gmail.com