SpecmehanizmMachine tools, repairs and CNC upgrades +7 (911) 941-00-11Call a specialist
Russia & CIS · international enquiries

Gear hobbing machine, model 5С280П

Availability to be confirmed

Repair and major overhaul 5С280П

Discuss repairs or a major overhaul of your machine. Feasibility, site visits, costs and timing are confirmed after reviewing the task and assessing its condition.

How our repair process works
Call about repairs

Attach photos, drawings and specifications to your email or message.

Description

The gear cutting machine, model 5С280П, is a semi-automatic machine of accuracy class "П", designed for rough and finish cutting of spiral bevel and hypoid gears. Cutting uses three methods: generating, plunge cutting and a combined method.


· The generating method is used for finish machining conventional bevel gears.

· The plunge method, without generating, is used for rough cutting of conventional bevel gears and for finishing semi-generating gear sets, where the mating pinion is machined by generating with profile modification.

· The plunge method, without generating, is used for rough cutting of conventional bevel gears and for finishing semi-generating gear sets, where the mating pinion is machined by generating with profile modification.

· The combined method is used for gears with a pitch cone angle of 70...80°. The tool plunges into the workpiece at a very low generating speed. Once the tooth has been machined to full depth, the plunge feed stops and final machining proceeds by generating

On this machine, indexing by 1 tooth takes place periodically after the workpiece is withdrawn from the tool.

The gear hobbing machine, model 5С280П, can be used in small-batch, high-volume and mass production. It offers higher productivity, versatility and reliability.


Technical specifications

Maximum diameter of gears being cut
800
Maximum gear module, mm.
16
30°, mm
400
Minimum and maximum bevel gear pitch cone angles, deg
5°42'...84°18'
Number of teeth on gears being cut, pcs
5..150
Maximum tooth height to be cut, mm.
35
Maximum gear face width, mm.
125
Machining time per tooth, sec
12..200
Maximum transmission ratio of gears being cut at a shaft angle of 90°
10
Cradle setting angle, degrees
0..360°
Cradle swivel scale division, arcminutes
1
Distance from the tool spindle face to the workhead pivot centre with the sliding base in its zero position, mm.
93
Gear cutting head diameters, mm.
160, 200, 250, 315, 400, 500
Gear cutting head speed, rpm.
20..125
Minimum and maximum distance from workhead spindle face to machine centre, mm.
135..600
Workhead axial positioning scale readout accuracy, mm.
0,02
Head setting angle for internal tapers, degrees
+5..+90
Scale reading accuracy when setting the head to the internal taper angle, arcminutes
1
Table retraction to the extreme non-working position, mm.
130
Vertical workhead setting for cutting hypoid gears, upward and downward, mm.
125
Head hypoid offset dial readout accuracy, mm.
0,02
Maximum base offset from the machine centre towards / away from the cradle, mm.
30 / 65
Electrical equipment
Number of electric motors on the machine
5
Main drive motor, kW
7,5
Hydraulic drive pump motor, kW
2,2
Feed mechanism drive magnetic amplifier, kW
2,0
Feed mechanism drive motor, kW
2,2
Coolant pump motor, kW
0,6
Total motor power, kW
14,5
Machine overall dimensions, mm:
Length
3170
Width
2180
Height
2200
Machine weight, kg
15200

Inspection and delivery

Please call before visiting to confirm the inspection location and site access.

Tell us the model, destination city and country, required configuration and timing. We will check feasibility and agree inspection, preparation, transport and documentation for your enquiry.

Delivery

Related equipment

Gear hobbing machine, model 532Availability to be confirmed

532

Gear hobbing and gear shaping machines. Design and applications.

Maximum gear module, mm
8
With straight teeth
750
With helical teeth, at an angle of 30°
500
Gear hobbing machine, model TOS FO-6Availability to be confirmed

TOS FO-6

Gear hobbing and gear shaping machines. Design and applications.

Maximum module that can be milled
6
Maximum spur gear diameter that can be milled, mm
600
Minimum and maximum axial distance between the table and milling slide, mm
40-430

Let's discuss your equipment and requirements

Include the model, task, city and country. Attach photos and documents in your email or messaging app.

Call us

Send an enquiry

Include the model, task, city and country. Attach photos and documents in your email or messaging app.

WhatsApp · +7 (911) 941-00-11 Email · specmehanizm@gmail.com